DOEPFER A-178 Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Kontrolleinheit DOEPFER A-178 herunter. DOEPFER A-178 8 Seiten.

A-178

Theremin

2 LEDs

The LEDs 2 indicate the state of the voltage at CV

outputs " and §.

3 LED

LED 3 shows the presence of a gate signal at gate

output $.

4 Threshold

Using control 4 you set a threshold voltage for the CV

output, above which a gate signal will be produced at

output $.

System A - 100

5. In / Outputs

! Antenna

Use socket ! to connect the antenna.

" CV Out

CV outputs " and § (internally linked) put out the

theremin's voltage.

$ Gate Out

Socket $ puts out the gate signal, whenever the

voltage created by the theremin is greater than the

threshold set with control 4. This gate signal can be

used as a noise-gate or as a source of manually-

triggered gates for other modules (see user exam-

ples).

If you use any other antenna than the te-

lescopic one provided, and find that it's not

longer possible to set the null point with the

offset control 1, then it may be necessary to

use the internal trim pot (see page 3, and

appendix, page 8).

•

§ CV Out

doepfer