Cyfral VIDEOMONITOR V4 Betriebs-, Installations- und Programmierhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Betriebs-, Installations- und Programmierhandbuch für Messgeräte Cyfral VIDEOMONITOR V4 herunter. Cyfral VIDEOMONITOR V4 7 Seiten.
Seite drucken
SETTINGS
After pressing the multifunction button
settings, turn the multifunctional button up/down. To confirm selected fields, press the multifunctional button.
The settings consist of the following groups:
1.
SYSTEM:
•
Language
•
Time
•
Advanced- Information regarding the device, file management
2.
SOUND:
•
Selecting a ringtone - selecting the incoming call melody between 1 and 10
•
Ringtone volume- selection of ringtone volume depending on the time of day
3.
SETTINGS:
•
Mode
•
Audio/video record mode - recording of the call on the SD card
•
Support of input 2
•
Opening Times
•
Motion detection
•
Messages
4.
ALARM:
•
For the monitor operating as
5.
DISPLAY:
•
Settings of brightness, contrast and colour saturation of the image
6.
FILES:
•
File browser for files saved on the SD card of the device
INTERCOM
V4 monitors can be cascaded up to three pieces per one property. The incoming call to the property will be
visible and audible on all, up to three, monitors. Answering a call on one of them will cause the other to turn
off. However, during a call, pressing the "intercom" button allows you to redirect the conversation to other
monitors.
In addition, pressing the "intercom" button in idle mode will allow you to conduct an internal call.
, the idle mode menu will appear. To navigate through the
- You can choose between Polish, English, Chinese
- Current time and date
- in the CC4000 system, absolutely
- Does not apply in CC4000
- Does not apply in CC4000
- Does not apply in CC4000
- Does not apply in CC4000
Slave
inactive
Slave
Page 5