Dog Care PC01 Faq - Seite 3

Blättern Sie online oder laden Sie pdf Faq für Haustierpflegeprodukt Dog Care PC01 herunter. Dog Care PC01 8 Seiten. Smart pet clipper

d. The blades overheat faster if clogged. Clean and oil the blades while the clipper is off. Refer to

how to clean the

e. Do not use the product with a damaged or broken attachment comb nor with teeth missing from

the blades as injury may occur. Replace the blades.

f. To cool down the blades, switch off the clipper and place it in a cool and ventilated place for 5

minutes, or replace the blades.

12. Blade service life icon

a. The clipper intelligently keeps track of your blade service life. If the wrench icon flashes, it

indicates the blades have run out of life and should be replaced.

b. After replacing the blades, press and hold the RESET button at the bottom of the clipper handle

for 5 seconds to reset the blade life monitoring function. The icon will show five bars again after

it is successfully reset.

13. What are the differences between the attachment combs/guides/guards and what size should I

use?

a. There are 6 sizes of attachment combs included in the box to trim the hair to different lengths.

From the largest to the smallest:

The 3/4" comb leaves hair approximately 3/4".



The 5/8" comb leaves hair approximately 5/8".



The 1/2" comb leaves hair approximately 1/2".



The 3/8" comb leaves hair approximately 3/8".



The 1/4" comb leaves hair approximately 1/4".



The 1/8" comb leaves hair approximately 1/8".



b. When using the clipper for the first time, if you are unsure of how long each comb leaves the hair,

start by placing the largest comb and make your way down if the desired length is shorter.

c. When using an attachment comb, if your pet's hair is matted, the attachment comb may get

clogged with mats and prevent the blades from reaching and hair and cutting properly, even if the

blades are sharp and the clipper motor has enough power. We recommend brush out your pet's

coat thoroughly and give them a bath before you clip. When moving your clipper, follow the

direction of the hair growth.

14. How to install the attachment combs?

Hold the comb with teeth up and snap it firmly to the bottom of the clipper blades until you hear a

click.

blades.

on the display flashes