Cyklos CFM 600 Betriebshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Falzmaschinen Cyklos CFM 600 herunter. Cyklos CFM 600 4 Seiten.

start/stop button

–

2 – speed control button

3 – feeding board

4 – tilting board

5 – feeding board arrestment lever

6 – light bulb control

7 – delivery drawer

8 – X stop

9 – Y stop

10 – ruler

11 – side guides

12 – front cover

13 – arretation button

14 – feeding wheel

15 – table of folds

16 – socket with the main switch

4) Operation mode - automatic paper feeding

Insert the feeding board arrestment lever 5 into its lower position. Feed the

paper on the tilting 3 board – being tilted away at the moment, placing it

between side guides 11 which are set approximately to the required paper

width. Then push the side guides towards the paper. Release the arrestment

lever, which allows the feeding board to lift up the stack of paper underneath

the feeding wheel 14. Turn on the machine with using the power switch 16. If

the machine is ready to work the red LED 6 shines continuously. If the red

LED 6 shines discontinuously, stops X 8 and Y 9 aren´t in right position or

there isn´t any paper on the feeding table 4. In such case is necessary to load

some paper on the feeding table 4 or put stops Y 8 and X 9 to the right

position.

After pressing the "start/stop" button 1, the paper will be fed automatically from

the pile of paper and folded into the waste box. The folding speed is regulated

by the button of control speed. When the last sheet leaves the machine, the

machine turns off automatically.

5) Methods of folding and control of stops

Pictures of individual types of folding

Each type of paper folding requires the precise setting of the sheet stop rider 13 at

the X and Y stops, following the information in the table of folding options 15.