Dogtra E-Fence 3500 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zäune & Tore Dogtra E-Fence 3500 herunter. Dogtra E-Fence 3500 16 Seiten.

Additional Parts

20ga Underground Fence Wire (500 feet)

The diagrams on p.18 are indicated for a rectangular layout.

dog will receive stimulation) at least 6-8 feet on each side of the wire.

passageways that are too narrow (i.e. along the sides on a house)

or your dog may hesitate from using them.

Tools

Phillips screwdriver and a wire cutter/stripper. If your layout

calls for the wires to be connected across concrete, you will also

need a caulking gun, exterior silicon caulk and a circular saw

with a masonry blade for cutting the pavement.

Boundary Training Flags (50 ea)

Creating a Neutral Zone in the Boundary

without getting stimulation. To braid the fence wire, hold the two

wires side by side, and twist them around each other. This can

also be done by securing the two wire ends in the opening of a

drill and letting the drill twist the wires for you. The tighter the

wires are twisted, the better the signal cancellation. Braiding the

two wires will interrupt the signal of the boundary wire, thus

creating a neutral zone.

Burying the Fence Wire

IMPORTANT

Before starting any digging, contact your local phone, gas and

power companies to locate any other buried services.

The E-Fence 3500 boundary wire does not have to be buried to

operate. For protective measures we highly recommend the wire

be buried about 3-4 inches underground. Begin by digging a 4-inch

and continue around the path of the loop wire. A 30- to 45-degree

Note : When covering a large area, a trenching machine may be

used to cut into the ground. However, it is recommended

that the wire be placed in the trench by hand.

A commercial wire-placing machine may damage the wire.

You must create a neutral zone

from the fence transmitter to the

beginning of the fence so the

signals do not cross over to any

existing utility wires. Start by

twisting the two pieces of fence

wire so they are braided from

the beginning of the neutral zone

area to the end. Braiding the two

wires will interrupt the signal of

the buried fence, thus creating

an area for your dog to cross