cymatic audio uTrack24 audiolan Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch für Aufnahmegeräte cymatic audio uTrack24 audiolan herunter. cymatic audio uTrack24 audiolan 20 Seiten.
Auch für cymatic audio uTrack24 audiolan: Benutzerhandbuch (18 seiten)
Seite drucken
3. SYNC GROUPS
Once the uTrack24 units are connected to the same network, they still act as independent recorders/players. You
need to assign units to a SYNC group in order to create a multi-unit system. IFollow these steps to create a SYNC
group. Please connect a USB drive before you continue.
3.1.
Creating a SYNC Group
In a first step, define which unit will be your MASTER unit. The MASTER uTrack24 is in charge of controlling the
SYNC group, either using the buttons which are all lit up and fully functional as in stand-alone mode, or through
uRemote.
On the MASTER, press the MENU button and select "Sync":
1.
In the Sync Menu, select "Setup uTrack24 sync":
2.
Start the SYNC group creation by selecting "Ok":
3.
4.
While waiting for the SLAVE(s), all connected units show:
Select "YES" on all units that should join this SYNC group.
5.
The MASTER will acknowledge every new SLAVE unit in the display:
When done, select "Ok" on the MASTER to complete the setup.
6.
Note that after the 3
auto-completes.
The MASTER unit can easily be identified as it is the only unit in the group with all transport buttons active and lit up,
while on the SLAVE units only the STOP button is illuminated. In addition, MASTER and SLAVE(s) can be identified
by the label in the display:
MASTER
SYNC
uTrack24
Aug. 2016
rd
SLAVE has joined the SYNC group, the setup
SYNC GROUPS
SLAVE
5