DogWatch Performance Series Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Haustierpflegeprodukt DogWatch Performance Series herunter. DogWatch Performance Series 13 Seiten. Hidden fence systems
Auch für DogWatch Performance Series: Benutzerhandbuch (14 seiten), Installationshandbuch (10 seiten), Benutzerhandbuch (16 seiten)
Seite drucken
Programmable Features
You can customize the receiver to one of 20 training settings, as outlined in the chart on
the right.
SETTING THE TRANSMITTER
Rates The Transmitter Rate switch adjusts to three settings: (1 = slow, 2 = medium,
3 = fast). When your dog gets a correction, he receives it in a series of pulses per
second. Increasing the rate means that he will receive a greater number of pulses per
second. Rate 1 is the slowest pulse rate per second; 3 is the fastest.
Training Modes The Training Mode switch allows you to choose between two
training options: Basic (Mode A) and QuickAlert
your pet will receive an audible warning followed by a correction. For harder to train
dogs, when set to the QuickAlert mode, your pet will receive a very quick "alert"
correction followed by the normal audible warning and correction.
SETTING THE RECEIVER
Receiver Training Levels Your receiver provides eight training levels that allow you
to customize the training setting to your dog's individual needs: Audible Only, Level 1
(extra low), Level 2 (low), Level 3 (low medium), Level 4 (medium), Level 5 (medium
high), Level 6 (high), and Level 7 (extra high). When the receiver is first shipped from
the manufacturer, it will automatically be set to Training Level 2 (low).
Changing the Receiver Settings Your Dogwatch Dealer will start the training on
the appropriate level according to your dog's personality and traits. If you need to
change the Training Level on the receiver, hold your test light magnet to the two
raised lines on the side of the receiver (see Figures 1 and 2). Hold the magnet steady
and you will hear a series of beeps that indicate the current training level. The
"Audible Only" level is one long beep, Level 1 is one short beep, Level 2 is two short
beeps, Level 3 is three short beeps, etc. The Training Level will continue to advance
while the magnet is held in position. When you reach the desired setting, pull the
magnet away from the receiver. The receiver is now set.
Note: Any time the magnet activates the receiver, the number of beeps will indicate
the current receiver level. As long as the magnet is held in place, it will advance the
receiver to the next training level and continue to cycle through the settings in the
order shown in the chart on Page 9.
igure 6: Using the test light magnet to
reset the R7 Receiver
TM
(Mode B). When in the Basic setting
igure 7: Using the test light magnet to
reset the R8 Receiver
8
Receiver Levels and Transmitter Settings
RECEIVER
T R A N S M I T T E R M O D E A N D R A T E S E T T I N G S
TRAINING
Mode A
Mode A
LEVELS
Rate 1
Rate 2
Audible Only
Transmitter Rate Fixed at Medium
(extra low) 1
Slow
Medium
(low) 2
Slow
Medium
(low medium) 3
Slow
Medium
(medium) 4
Fast
(medium high) 5
X-Fast
(high) 6
XX-Fast
(extra high) 7
Audible and XXX Fast Correction are Simultaneous
For example: If the receiver is on Level 1 and the transmitter is on Rate 1, your dog will receive the
lowest level of correction and the least number of pulses per second.
Please remember that if your Receiver Level is set to 1, 2, or 3 and you switch the Training Mode to
QuickAlert (Mode B), your training setting may change. For example, if the receiver is set to Level 3 and
the transmitter is set to Rate 1, your dog will receive a slow correction. If you switch your Training Mode
to QuickAlert, your dog will now receive a fast correction.
Handy Programming Tips
Recommended Settings: The majority of dogs respond well to transmitter Rate
Setting 2 or 3 and a receiver Training Level 3, 4 or 5. Sensitive or small dogs that train
easily respond best to lower rate settings and lower training levels. If your dog is not
responding to training, your DogWatch Dealer will adjust your system to a higher
training level.
If Your Dog Is Hard To Train: Training Levels 5, 6 and 7 of your receivers are
specifically designed to meet the needs of hard to train or stubborn dogs. These
setting will provide the extra correction that some dogs need as part of their training.
Multiple Dogs: Our receivers allow you to select Audible Only as your Training Level
setting on each individual receiver — allowing you to conduct training with one dog
while the other is still protected with the correction feature enabled. It is recommended
that the Audible Only setting be used only during supervised training sessions.
*** IMPORTANT ***
Never change the Receiver Training Levels when your dog is wearing the collar.
Mode A
Mode B
Rate 3
QuickAlert
TM
Fast
Slow
Fast
Medium
Fast
Fast
}
AutoMemory
Fast
self activates
X-Fast
and advances
XX-Fast
to the next level.
9
TM