Cymbol G3 Series Kurzanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Kurzanleitung für Sicherheitskamera Cymbol G3 Series herunter. Cymbol G3 Series 13 Seiten. Network transmitter
Auch für Cymbol G3 Series: Kurzanleitung (13 seiten), Kurzanleitung (16 seiten), Kurzanleitung (12 seiten)

Seite drucken

▶ ID & IP assignment

To make changes in the OSD menu, please use the OSD controller provided optionally with your

camera purchase. You can set Camera Title and IP Address.

1. Connect the OSD Controller to the Service Monitor port of the network camera.

2. Connect Service Monitor and the Video Output port of the OSD Controller.

3. Press the SET button to access main Menu.

4. Change Camera ID, and IP Address. You can change the Name or Title and IP address of the

camera. Using the ↑↓←→ buttons on the controller, you can change the parameters.

5. Select SAVE or CANCEL to exit the Main Menu.

Video Output is used for an easy zoom and focus control when installing lens. Video Output is

restricted to 704x480(576) resolution.

2.3 Network Connection and IP assignment

The network camera is designed for use on an Ethernet network and requires an IP address for

access. Most networks today have a DHCP server that automatically assigns IP addresses to

connected devices. By the factory default, your camera is set to obtain the IP address automatically

via DHCP server. If your network does not have a DHCP server the network camera will use

192.168.1.100 as the default IP address.

If DHCP is enabled and the product cannot be accessed, run the "Smart Manager" utility on the CD to

search and allocate an IP address to your products, or reset the product to the factory default settings

and then perform the installation again.

Quick Installation Guide