CYMEDICA Orthopedics QB1 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Körperpflegeprodukte CYMEDICA Orthopedics QB1 herunter. CYMEDICA Orthopedics QB1 7 Seiten. Knee brace
Auch für CYMEDICA Orthopedics QB1: Benutzerhandbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Benutzerhandbuch (10 seiten)

QB1 KNEE BRACE

The QB1 knee brace is used with QB1 knee Conductive Grament, refer to QB1 NMES & TENS System

User's Manual for information related to the conductive garment.

The following picture shows the QB1 knee Brace and the main components. The hinge can be locked

out or adjusted to limit knee range of motion.

5.1

Instructions for Wearing the Knee Brace

Start with following the instructions from the previous section, Section 6.3, "Wearing the conductive

garment".

Starting with Brace Strap A, feed strap

through its associated loop and attach

so the brace is snug against the leg.

Attach remaining Brace Straps in

order:

Brace Strap B.

Brace Strap C.

Brace Strap D.

Verify that the Brace bars are aligned along with the midline of the leg.

Using the Lock Out feature of the QB1 ACL Brace

The QB1 knee Brace can be locked out at 0° via the Slide Lock to prevent knee motion.

Locking the knee Brace in extension

To lock out the Brace in extension, fully extend your leg and align the Slide Lock between the two white

lines on the hinge. When positioned, move the Slide Lock towards your foot to secure. Ensure that each

Slide Lock is fully seated into its mating slot on the hinge. Repeat for both ACL Brace hinges.

02/2016

Flexion Stop Setting

Hinge Dial Lock

Hinge Dial

Slide Lock

Extension Stop Settings

QB‐0090‐004, Rev. B, Page 5 of 7