Doheny's ProJet Free 600 Gebrauchsanweisung - Seite 4
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Schwimmbad-Staubsauger Doheny's ProJet Free 600 herunter. Doheny's ProJet Free 600 10 Seiten. Battery- operated robotic pool cleaner for aboveground pools
Assembly
A: Floater
B: Upper cover
B-1: Jet head
C: Fine Filter
D: Filter
E: Bottom base
F: Charger
G: Hook
The jet head (B1) rotates 180 degrees as the water flows through the
bottom base (E), the filters (C & D) and the upper cover (B). The
water flow passing through the jet head propels the robot across the
pool floor. Should an obstacle prevent the robot from moving
forward, the jet head turns 180 degrees and sends the robot in the
opposite direction. The debris is collected and stored in the bottom
base (E) of the cleaner as clean water passes through the filter (C)
Assembly and Operation
Charging the cleaner
Use only the original external adapter and charging cable provided.
Make sure the robot and charger ports are clean and dry before installation.
Charge the robot before using it for the first time (about 4-5 hours)
1. Remove the pin cover from the charging port located under
the cleaner. To avoid losing the cover, attach the pin cover to
the charging cable.
2. Place the charger plug into the charging port at the bottom
of the cleaner, then plug the charger into the power supply to
begin charging the cleaner.
Note: Once the robot starts charging, the indicator light on
the external adapter will turn red. When the robot is fully
charged, the indicator light will turn green.
3. When fully charged, pull the charger plug out
of the charging port at the bottom of the cleaner.
Securely place the pin cover over the charging
port making sure the port is sealed before placing
the cleaner in the water.
G
F
3
A
B-1
B
C
D
E
Bottom cover body
assembly bottom
Switch
Switch
Pin cover
Charging port
Charger Port
Charger