Akrobat STORMER PLUS Installations- und Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Zubehör Akrobat STORMER PLUS herunter. Akrobat STORMER PLUS 9 Seiten. 10 ft, 12 ft, 14 ft and 480 cm

Seite drucken

2. TRAMPOLINE PARTS

Stormer 10ft

(305 cm)

Frame part without

Part A

4 pcs

sockets

Part B

Frame part with sockets

4 pcs

Part C

Leg extension

8 pcs

Part D

Trampoline leg

4 pcs

Part E

Junction part

8 pcs

Part F

Jumping mat

1 pc

Part G

Springs

64 pcs

Part H

Frame pad

1 pc

Part I

Frame pad elastics

16 pcs

Part J

Ladder

1 pcs

Safety net assembly parts

Part K

Poles for safety net

7 pcs

Part L

Safety net

1 pc

Part M

Fiberglass Rods

8 pcs

Part N

Caps for safety net

8 pcs

INSTALLATION AND USER MANUAL - STORMER PLUS

Stormer 12ft

Stormer 14ft

Stormer

(366 cm)

(427 cm)

480 cm

4 pcs

5 pcs

4 pcs

5 pcs

8 pcs

10 pcs

4 pcs

5 pcs

8 pcs

10 pcs

1 pc

80 pcs

96 pcs

104 pcs

1 pc

16 pcs

20 pcs

1 pcs

7 pcs

9 pcs

1 pc

8 pcs

10 pcs

8 pcs

10 pcs

3. ASSEMBLY AND INSTALLATION

We recommend at least two people to assemble the trampoline. Use gloves to protect your hands from pinch points and

sharp points during assembly. Do not apply excessive force during assembly that will cause damage to the product.

The parts are made for assembly without screwing with a simple AkroClick system.

Assembling the frame

Place the trampoline frame (Parts C, D and

E) flat on the ground. This way you will have a

better overview.

Place the leg extensions on the trampoline legs

(Part C into Part D).

Next, add the junction part to the leg extension

(Part D and Part E). The part with closed

bottom is the part where the safety net poles

will be set.

Continue by joining the frame legs with the

frame parts – start with the frame part with

T-socket (as shown on the image). Make sure

the free part of the junction part is turned

to the outside of the frame circle. Continue

assembling the frame, alternating the frame

parts with and without sockets to form a circle.

Important:

The trampoline legs could sometimes

be slightly tight to fit – it is intended

this way to serve as additional strength

for the trampoline.

The frame of your trampoline is now assembled

and you can place it on the desired location.