Dohle ExOn5 Betriebsanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Zubehör für das Schweißen Dohle ExOn5 herunter. Dohle ExOn5 16 Seiten.

Operating Instructions

DOHLE Hand Welding Extruder ExOn5

View – controller front – steering box

standard

D - 2381 controller extruder ExOn5 mass

D - 2384 switch heater ExOn2-6

D - 2383 poti ExOn2-6

speed extruder

Display and control elements of the controller front

Temperature unit

AL (Alarm)

Shines if the alarm

exit is on

Controller – desired value setting

All controllers can be changed only in the desired value and are electrnically locked against

wrong inputs.

Change the desired value

The controller indicates actual and desired value temperature at the same time. To change

the desired value temperature proceed as follows:

Do not press these keys.

Downward - key

By every press of this key, the value

becomes smaller, which is indicated

on the desired value display. If this

key is kept constantly pressed, then

the value is sequentially becomes

smaller.

D - 2377 temperature controller ExOn2-6 air

Actual value temperature

tettempevaluetemperatur

Downward - key

DOHLE Extrusionstechnik GmbH

optional

D - 2383 poti ExOn2-6

air flow

Desired value temperatur

Upward - key

By every press of this key, the

value increases, which is indicated

on the desired value display. If this

key is kept constantly pressed,

then the value sequentially

becomes higher.