akrometrix DIC Benutzerhandbuch - Seite 19

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kontrolleinheit akrometrix DIC herunter. akrometrix DIC 19 Seiten.

DIC User Manual

Appendix A - Miscellaneous Information

A.1 Equipment Ratings

Supply Voltage

Amp Rating

*All electrical requirements supplied by host AXP system, no additional

facilities setup needed

Footprint

Weight

A.2 Transport

When transporting the DIC system to a new location, Akrometrix recommends that

certain components be removed from the system and packed and moved separately.

These include:

 Cameras and lenses

 Grating and grating frame

A.3 Maintenance

A.3.1 Optical Lenses

The camera lenses are exposed directly to the air and may collect dust over time.

Dust or dirt on the camera lenses will not be seen directly but may darken the images.

To clean dust on the lenses, use a non-flammable compressed air duster (canned

air), such as would be used for cleaning computer components. Blow away dust without

touching the lenses.

The lenses may also be contaminated with residues from dust or fingerprints. If this

takes place, they should be removed from the cameras and cleaned with lint-free lens

tissue (such as Kimwipes or other disposable absorbent papers designed for delicate

use and high-absorbency) and lens cleaning fluid. When using lens tissue to clean the

lenses, gently wipe the surface in one direction once and change to a new piece of

tissue to clean continuously until the lens is clean.

Electrical*

220VAC, 50/60 Hz, 1Φ

~1 A

Mechanical

629 (w) x 355 (d) x 340 (h) mm

Camera Sub-Assembly:

Camera Sub-Assembly with Common Crossbar:

Warning: Do not use the tissue to rub the lens surface

back and forth. This may leave scratches on the glass

surface and damage the lens.

40-5000-01500 Rev. A

0.6kg

3.2kg

Page 19 of 19