CYP CLUX-14S Betriebshandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Medienkonverter CYP CLUX-14S herunter. CYP CLUX-14S 8 Seiten. 1x4 hdmi splitter
Auch für CYP CLUX-14S: Betriebshandbuch (8 seiten)
Seite drucken3.2 Rear Panel
HDMI IN
EDID
STD
TV
1
1 EDID Control Jumper: Default factory setting is TV, leave as is if the
display is properly. Switch to STD to use build-in EDID if the display has
problems. When the EDID control jumper in TV selection, the unit will
detect the first HDMI output source's EDID and record in the unit. If the first
detected output source is DVI it will pass to next source, until the first HDMI
been detected.
2 HDMI Input: Connect input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
3 HDMI Outputs 1 to 4: Connect each of the output ports to the HDMI
display. When more than one output connected, the HDMI outputs play
identical video signal simultaneously.
4 Power: Plug the 5V DC power supply into the splitter and connect the
adaptor to AC wall outlet.
1
2
HDMI OUT
2
3
3
3
DC 5V
4
4