CYP CP-1262DE Betriebshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Medienkonverter CYP CP-1262DE herunter. CYP CP-1262DE 8 Seiten. Dvi to pc/component converter box

Seite drucken
CYP CP-1262DE Betriebshandbuch

3. Operation Controls and Functions

3.1 Front Panel

1 DVI input: Connect the DVI-D input port to the DVI output port of your
source equipment such as DVD player or set-top-box. It supports only
DVI-D signal via a DVI-I connector.
2 Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.

3.2 Rear Panel

1 HD-15 D-Sub output: Connect the output port to the PC/YPbPr input of
analog PC monitor, Projector or TV.
2 YPbPr/RGB switch:
Set the switch to RGB when your DVI source equipment is PC graphic card
or other digital RGB source signal. Use HD-15 to HD-15 VGA cable to
connect between the unit's RGB out and the RGB input of your PC
monitor, or projector. Set the switch to YPbPr when your DVI source
equipment is DVD player, set-top-box or other High definition digital video
source. Use a VGA to 3 RCA adaptor cable to connect the unit's YPbPr
out to the YPbPr input connector of your HDTV.
Note: When YPbPr output from HD-15 D-Sub the H-pin and V-pin will remain
the signal at the same time.
DVI INPUT
1
PC/YPbPr OUTPUT
1
2
DC 5V
2
OUTPUT
YPbPr
RGB
2