CYP CP-255I Betriebshandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Medienkonverter CYP CP-255I herunter. CYP CP-255I 20 Seiten. Cv/sv/pc/hd/hdmi 1080p scaler box
Auch für CYP CP-255I: Betriebshandbuch (12 seiten)

Seite drucken

6.4. Remote Control

1. POWER:

Press the button once to power on the unit. Press

again to enter standby mode.

2. INPUT:

Press the button repeatedly to toggle through

various input sources.

3. HD INPUT:

Press the button to directly select component

input.

4. PC INPUT:

Press the button to directly select PC input.

5. HDMI/DVI INPUT:

Press the button to directly select DVI (or HDMI) input.

6. OUTPUT RESOLUTION:

Press appropriate button to directly select the preferred output resolution.

Other output resolutions that are not covered by these buttons can be

selected from the OSD Menu.

7. MENU:

Press the button to bring up the OSD main menu page.

8. EXIT:

Press the button to exit from a sub menu or main menu.

9. UP/DOWN/LEFT/RIGHT:

Press the Up/Down button to move the highlight bar to your desired

parameter during the OSD operation. Press the Left/Right button to

increase/decrease the value of a selected parameter.

10. OK (ENTER):

Press the button to confirm your selection.

11. RESET:

Press the button to reset the unit's firmware setting to the factory default

value.

12. AUTO ADJUST:

Press the button to optimize the positioning of the picture (picture

centering) on the screen.