Dok CR32 Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Docking-Station Dok CR32 herunter. Dok CR32 20 Seiten. Universal multicharging station

Operations

1. Install 2 AAA batteries (for backup only).

2. Plug the AC adaptor cable into a standard 120V AC wall socket. Adaptor is required to

operate unit. Batteries are for backup only.

3. Time setting:

a. Press and hold CLOCK button, until the Time/(Hour) display begins flashing;

b. Press and release TUNE/TIME + or - to adjust Hours;

c.Press and release CLOCK button switch to Minute adjusts mode(when it flashing);

d. Do the same as hour adjusting(hold for faster setting).

e. Press and release CLOCK to finish setting.

Using the Alarms

This unit has a dual alarm system so you can set two separate alarms to different alarm

times.

• Setting the Alarms

Note: Alarm1 and Alarm2 are set the same way.

1. Press and hold the ALARM(1 or 2) button until the alarm time flashes display;

2. Adjust the alarm time like clock setting;

3. Press and release TUNE/TIME + or - to adjust alarm volume.

4. Select FM(radio) or BZ (buzzer) by FM/BZ as an alarm tone;

5. Press and release the related alarm button to finish setting;

(you can see alarm icon shows on the display).

• Reviewing, Arming and Disarming Alarm(Turn Alarm function On and Off)

1. Alarms are automatically armed when set. Active alarms are indicated by alarm types

on the display.

2. To review the alarm time, press and release the ALARM button once. The related wake

to source and alarm time will show on the display.

3. Press and release the ALARM ON/OFF button once to toggle it on or off. If the alarm is

armed, the alarm type will light up.

To Turn one of the alarms Off

1. Press and hold the related alarm button until it flashes on the display;

2. Skip the hour and minute adjust and go to the alarm tone type setting;

3. Press and release the FM/BZ to select alarm tone until no tone icon shows on the

display.

• Stop the Alarms

When the alarm is sounding, press any key except the VOLUME+ or - and SNOOZE/

DIMMER to stop the alarm and reset it to next day.

(The BUZZER alarm will last one hour if you do not stop it; The RADIO alarm will not stop)

• Snooze Operation

Default snooze time is 9 minutes. Press and release the SNOOZE/DIMMER after an alarm

sounds. The alarm will be silenced for the snooze time then sound again. Snooze can be

pressed several times.

Charging your smart devices or other personal devices:

USB ports are provided to charge up to 4 devices simultaneously. Connect the USB cable

between your device and the unit. USB cable(s) are provided.