CYP PRO-H2-3GSDI Betriebshandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Medienkonverter CYP PRO-H2-3GSDI herunter. CYP PRO-H2-3GSDI 20 Seiten. Hdmi to 3g-sdi dual output converter
Auch für CYP PRO-H2-3GSDI: Betriebshandbuch (15 seiten)

Seite drucken

Note

1. Key:

"  " LED On

"●" LED Off

"  " LED Flashing

2. Not all of HDMI timings can be converted to SDI, therefore selecting the default EDID settings provides the

HDMI source with output timing reference.

3. EDID switch mode/Default EDID setting:

3G  1080p@60

HD  1080i@60

Update  720p@60

4. Due to the fact that the HDMI default timing is mainly set to 480p, there is a possibility that the image will

not be displayed correctly as that timing is not supported by SDI . To avoid this, set the HDMI source input

output setting to "Automatic" so that the source equipment will receive the native EDID settings of the

display.

5. The EDID update procedure only needs to be done for Nos. 4,8,12,16,20 & 24. (please refer to "EDID Update

button"in section 6.3).

6. When the HDMI input source signal has content that is HDCP encrypted the EDID Update and Video Lock

LEDs will both flash, the other LEDs will not illuminate and no image will be displayed.