Doka Staxo 40 Original Betriebsanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Original Betriebsanleitung für Sicherheitssensoren Doka Staxo 40 herunter. Doka Staxo 40 5 Seiten. Shifting wheel
Seite druckenOriginal Operating Instructions Staxo 40 shifting wheel
Wheeling the load-bearing tower
NOTICE
▪
Particular care is needed with:
- height offsets
- steps
- floor holes and wall openings
- strong wind
▪
It is forbidden for any third persons to linger
in the immediate danger zone!
▪
Exercise caution regarding the risk of over-
turning (particularly in strong wind).
▪
It is forbidden to use any mechanical assis-
tance during the wheeling operation!
▪
Take care to start moving gently, and to
exert a constant, uniform pull.
▪
Max. speed 4 km/h (walking pace)
▪
Special care is needed when travelling
across shoulders in the ground (no sharp-
edged shoulders, max. shoulder-height
15 mm).
▪
For longer breaks between operations, or
when the the load-bearing tower is perma-
nently parked, take the load off the shifting-
wheels (by lowering the tower to the
ground).
WARNING
➤
"Passenger transportation" is forbidden!
➤
Before the repositioning operation, remove
any loose items (e.g. fitting-boards) from the
load-bearing tower and formwork.
WARNING
Risk of overturning!
➤
The load-bearing tower may only be raised
by max. 5 cm in order to be travelled.
92848-203-01
b ... max. 5 cm
999284802 - 08/2018
Crane-lifting of load-bearing towers with
shifting-wheels mounted to them
Follow the directions for resetting by crane
(slinging points etc.) in the "Staxo load-bearing
tower 40" User Information booklet.
➤
Check that the shifting-wheels are properly fixed to
the load-bearing tower.
Check to make sure that all the bolts are
secured by linch pins.
Lowering the load-bearing tower
NOTICE
The split nut must not be opened when loaded!
➤
First lower the load-bearing tower onto the ground by
turning the screwjack mechanism in the shifting-
wheel.
Declaration of conformity
EC Declaration of Conformity
pursuant to EC Directive 2006/42/EC.
The manufacturer declares that by reason of its conception and
design, the following product
Staxo 40 shifting wheel, Art. n° 582218000
conforms – in the version marketed by ourselves – to the pertinent
fundamental health and safety stipulations of the relevant EC Direc-
tives.
The following harmonised Standards were applied:
▪
EN ISO 12100:2010
▪
EN 349:1993+A1:2008
Person authorised to compile technical documentation
(pursuant to European Directive on Machinery Annex II):
Dipl.-Ing. Ludwig Pekarek
Josef Umdasch Platz 1
A-3300 Amstetten
Amstetten, 07/08/2018
Dipl.-Ing. Ludwig Pekarek
Executive Manager
Doka GmbH
Josef Umdasch Platz 1
A-3300 Amstetten
Dipl.-Ing. Peter Reisinger
Authorised Officer, Head of Engi-
neering
5