CYP nT15GX01 Betriebshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Matrix Switcher CYP nT15GX01 herunter. CYP nT15GX01 20 Seiten. 8×8 dvi matrix with audio

6. OPERATION CONTROLS AND FUNCTIONS

8X8 DVI MATRIX CMSI-8D8DSA

LCM: Displays the setting information of each input and output

setting.

POWER: Press this button to power the device on/off. The LED will

illuminate green when the power is on, red when it is in 'Standby'

mode.

LOCK: Press this button to lock all the buttons on the panel; press

again to unlock. The LED will illuminate green when locked.

IR: IR Receiver window (accepts the remote control signal of this

device only).

MENU: Press this button once to select EDID setting from STD

(internal) 1 or TV (external) 2 then press it again to conrm the

selection. Press this button every to conrm the selection.

Note: For the 'TV' EDID setting, the unit will read and store the

EDID information of the display connected to HDMI output A. For

the 'STD' EDID setting the unit's built-in EDID setting will be used

(1080p@60/12-bit for video and LPCM 2CH for audio).

1~8/A~H and IN/OUT: Press the OUT or IN button to select the

output or input mode and then press the required number button

to make the selection accordingly.

For example, if outputs A~D need to be set to input 1 and outputs

E~H need to be set to input 2, then the following sequence of

button presses need to be performed:

Press: OUT A B C D IN 1 MENU,

and then press: OUT E F G H IN 2 MENU.

Note: If the MENU button is not pressed the selection will not be

changed.

POWER

LOCK

OUT