CYP PU-424HBTE Betriebshandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Matrix Switcher CYP PU-424HBTE herunter. CYP PU-424HBTE 20 Seiten. 4 x 4 hdmi hdbaset matrix with 2 simultaneous hdmi outputs (5-play™ including poe)
Seite drucken
4. SYSTEM REQUIREMENTS
HDMI equipped source devices, connect with HDMI cables or DVI
equipped source, connect with DVI to HDMI cables
HDMI equipped displays (TVs or monitors) or HDMI equipped AV
receivers, connect with HDMI cables
Industry standard CAT5e/6/7 cables
HDBaseT™ Receivers (i.e. PU-506RX, PU-507RX or PU-1109RX)
5. FEATURES
Supports all v1.3 HDMI resolutions
Supports uncompressed video/audio up to 10.2Gbps
Common supported resolutions: HDTV: 480p, 576p, 720p, 1080i,
1080p, 1080p24; PC: VGA, SVGA, XGA, WXGA, SXGA, UXGA, WUXGA.
HDMI, HDCP and DVI complaint
High Definition Audio supported: Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio plus LPCM (up to 192kHz)
Uncompressed data transfer over single CAT cable (100m - CAT6/7;
80m - CAT5e)
Supports third-party control systems, with drivers available for: Control
FX, AMX, Crestron, RTI, Control 4
Supports HDMI input up to 15m 1080p 8bit or 10m 1080p 12bit.
Supports RS-232, 2-Way IR, Manual Selection Buttons, and HDMI CEC
control pass through
Selectable EDID settings - TV (downstream) and STD (fixed)
Compact 1U Rack mount design
Supports 3D signals
Supports additional IR Control via a master (ALL) Input/Output
Supports LAN serving to all connected zones
Supports full IP control
Note:
1. The PoE function is designed for powering compatible receiver units only—
non-PoE receivers will need their own power supply. Receivers of another
brand may not be compatible.
2. Do not connect the LAN/CONTROL port to the CAT outputs of this device.
7