CYP PU-O4H4C Betriebshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Matrix Switcher CYP PU-O4H4C herunter. CYP PU-O4H4C 16 Seiten. V1.3 hdmi 4x4 matrix with built in hdmi over cat6 outputs
Auch für CYP PU-O4H4C: Betriebshandbuch (12 seiten)

Seite drucken

2. When EDID is switched to STD, the unit will use its built-in EDID that

supports:

Video → 1080p 12-bit (max) supports xvYCC

Audio → PCM 2CH

3. The EDID selection will only be activated after the unit is re-plugged

and powered on.

② . RS-232: This slot is where you connect a D-Sub 9-pin cable to the PC COM

port when controlling the device over RS-232. Detailed specifications are

listed in section 9.

③ . Video/DDC CAT 6 outputs: These slots are where you connect two

CAT6 cables to a receiver box that has HDMI output and through the

HDMI output it can be connect to TV. The receiver box can also be a

splitter that provides additional CAT6 outputs when cascading from a

HDMI receiver to the display via HDMI cable.

④． IR OUT: These slots are where you connect with IR blaster cables included

in the package. Place it near each designate source equipment for

infrared signal sending.

⑤ . HDMI inputs: These slots are where you connect input ports to the HDMI

or DVI output of your source equipments such as DVD player or set-top-

box with HDMI cables.

⑥ . Power: Plug the 5VDC power supply into the unit and connect the

adaptor to an AC wall outlet.

⑦ . IR MAIN IN: This slot is where you connect the IR receiver cable included

in the package. Connecting the IR receiver cable allows you to source

equipments through the existing remote controls.

⑧ . IR MAIN OUT: This slot is where you connect the IR blaster cable included

in the package. Place it near both the device and/or source equipments

for infrared signal sending.

5 5