Ashcroft GC52 Produktinformationsseite - Seite 6

Blättern Sie online oder laden Sie pdf Produktinformationsseite für Transmitter Ashcroft GC52 herunter. Ashcroft GC52 8 Seiten. Differencial pressure transmitter

Seite drucken

Product Information Page



S bt To enter switch mode of momentary flow rate and integrated

volume. There is manual mode (bt) or automatic mode (ti).



For this application manual switch mode shall be selected.



It only displays integrated volume when cover is removed and M

Step

button is pressed. Otherwise it only displays flow rate.



Automatic setting time is selectable from 1 to 10 seconds cycle.



Press UP or Down arrow until "bt" is displayed.



Press and release M button to select and move to the next step.



C 0.0 Loop check mode allows program and analog output

verification with the transmitter pressurized or non-pressurized. It

Step

simulates the process and allows for troubleshooting.



Press Up or Down arrow to change within transmitter range (0 to 88

GPM of water).



Press and release M button to return to the begin of program



After verification press and hold M button for more three seconds to

return to measuring mode.

Function Verification:

The GC52 loop-check allows to verify program and analog output with the transmitter pressurized or

non-pressurized.



Once Step-11 is reached, the unit is in Loop-

check mode. The system can be verified by

increasing or decreasing the flow rate value (0 to

88 GPM of water).



Use the Up or down arrow and observe the

display segments get brighter as the flow rate

value increases. That, is an indication that the

analog output and wiring are reacting properly.

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

ashcroft.com

info@ ashcroft.com

1.800.328.8258

Rev. A 02/17, Page 6 of 8