CYP PU-8H8HBT Betriebshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Schalter CYP PU-8H8HBT herunter. CYP PU-8H8HBT 20 Seiten. 8 x 8 hdmi hdbaset matrix (inc. poe)

Seite drucken

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panels

LCD Display: Displays the setting information of each input and

output selection.

Power button LED: Press this button to power the device on/off.

The LED will illuminate green when the power is on, red when it is in

'Standby' mode.

LOCK: Press this button to lock all the buttons on the panel, press

again to unlock. The LED will illuminate green when locked.

IR: IR Receiver window (accepts the remote control signal of this

device only).

MENU: Press this button to change the EDID setting from STD (internal)

1 to TV (external) 2 , press it again to confirm the selection.

1~8/A~H and Out/In button: Press the Out or In button to select the

output or input mode then press the required number button to make

the selection accordingly.

For example, if outputs A~D need to be set to input 1 and outputs

E~H need to be set to input 2 then the following sequence of button

presses need to be performed

Press: Out  A  B  C  D  In  1  Menu,

and then press: Out  E  F  G  H  In  2  Menu.

Note: If the menu button is not pressed the selection will not be changed.

POWER

LOCK

OUT