Dolby Audio ZVOX SB380 Handbuch für Einrichtung und Betrieb - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch für Einrichtung und Betrieb für Lautsprechersystem Dolby Audio ZVOX SB380 herunter. Dolby Audio ZVOX SB380 12 Seiten.
Seite drucken
Alternative Ways To Connect The ZVOX Soundbar SB380
Back of TV
A)
(TV Port Example)
PC
AUDIO OUT
X
IN
A) Analog Out/Headphone port of TV set.
Red & White RCA to 3.5 mm Mini Analog Stereo Cable
B) Input panel of ZVOX sound bar.
Many TVs have a headphone audio out minijack sometimes labeled "Audio Out" or "HP" not PC IN.
Insert the supplied 3.5mm miniplug end of the cable into the TV's headphone audio out minijack. (A) Insert the
opposite red and white end of the cable into the ZVOX speaker red and white input jack labeled ANALOG INPUT.
(B)
Once the RCA to mini analog stereo cable is completely connected it will be important to maintain the TVs main
volume above 50% and continue using the ZVOX remote as the main volume control, if ignored it may cause a
weak enough audio signal and cause the "auto shut off" to go off.
If you have yet to hear sound tap the INPUT button on the ZVOX speaker remote until "In3A" appears on the
ZVOX display, this selects the analog minijack input.
Note: Maintain the main TVs volume above 50% and continue using the ZVOX remote for volume control, if
neglected it may cause a weak enough audio signal causing the auto shut off to react.
If your TV doesn't have an optical output, here are some other options:
B
B)
Back of TV
A)
RCA jacks
Other
labeled
RCA jacks
"AUDIO OUT"
(usually audio IN)
R
L
R
L
A) Analog Out/RCA (Red and White) port of TV set.
Red & White RCA Analog Audio Cable
B) Input panel of ZVOX sound bar.
Some TVs have red/white RCA jacks for analog audio output Be sure you have located the red and white jacks
on the TV that are specifically marked as "AUDIO OUTPUT" NOT "Audio IN or COMP IN". (A)
Insert one set of red and white plugs into the red and white jacks on the TV labeled "Audio Out". (A) Insert the
opposite set into the ZVOX speakers red and white input jack labeled ANALOG INPUT. (B)
Once the RCA analog cable is completely connected, tune your TV to a program, then use the original TV
remote to access the Home Menu -> Options or Settings -> Sound or Audio -> TV Speakers -> OFF or Speaker
List, Sound Out -> Select Audio System, External Speaker, or the Optical audio out option. (Menu list varies
based on TVs year and make, see TVs owners manual) If this option is unavailable keep the main TV volume at
zero and continue using the ZVOX remote for volume.
Note: Rarely TVs list an analog audio setting that must be set from Variable to FIXED, if you see this do so. If
you have yet to hear sound, tap the input button on the ZVOX remote control until the ZVOX display reads in2a.
Continue using the ZVOX remote for the volume control.If you have yet to hear sound tap the INPUT button on
the ZVOX speaker remote until "In3A" appears on the ZVOX display, this selects the analog jack input.
C
B)
X