CYP CWHDI-TX1 Betriebshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Empfänger CYP CWHDI-TX1 herunter. CYP CWHDI-TX1 12 Seiten. Wireless hdmi transmitter and receiver box

Seite drucken

4.1.2 Rear Panel

HDMI IN3

HDMI 1/2/3 Inputs: Connect each of the input ports to the HDMI output

①

of your source equipment such as DVD/Blu-Ray player or set-top-box.

IR Blaster: Connect the IR blaster cable included in the package and

②

place it in front of the source equipment. The IR blaster will transmit the

infrared signal to the connected source with the existing remote signal

send to this device.

Power: Plug the 5V DC power supply into this unit and connect the

③

adaptor to an AC outlet.

4.2

Receiver side

4.2.1 Front Panel

CWHDI-RX1 Receiver

① Power: Press to turn the system on/off.

② ID: Press transmitter "ID" button and receiver "ID" button for 2 second to

connect the system. The system was already connected before leaving the

factory, so users do not need to reset it unless the system cannot up link

properly. Press

HDMI IN2

Power

Link

Power

HDMI IN1

BLASTER

DC 5V