CYP PU-507RX-SCD Betriebshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Empfänger CYP PU-507RX-SCD herunter. CYP PU-507RX-SCD 18 Seiten. 5-play hdbaset receiver with integrated video scaling & audio breakout (inc. poe & single lan, up to 100m) - stereo audio only
Auch für CYP PU-507RX-SCD: Betriebshandbuch (20 seiten)

Seite drucken

6.2 Rear Panel

DC 24V

POWER

Power LED: This LED will illuminate when the device is connected to

an active power supply.

DC 24V: Connect the 24 V DC power supply to the unit and plug the

adaptor into an AC outlet. Only one unit requires powering if both the

Transmitter and Receiver are both PoE compatible.

RS-232 OUT: Connect to the device that is to be controlled (via D-Sub

9 pin female cable) by RS-232 commands.

LAN: Connect to an active network for LAN serving. When any

compatible LAN equipped receivers are connected, this allows the

network access (including internet access if available) to be shared

between any connected LAN equipped receivers. Connect any

Ethernet equipped device e.g. a Smart TV or games console to the

LAN port of a receiver for that device to share the network/internet

access.

Warning: DO NOT connect the LAN connection to the CAT5e/6/7 port.

Doing so may cause a power shutdown and may damage the device.

IR Blaster: Connect the supplied IR Blaster cable for IR signal

transmission. Place the IR Blaster in direct line-of-sight of the

equipment to be controlled.

IR Extender: Connect to the supplied IR Receiver cables for IR signal

reception. Ensure that remote being used is within the direct line-of-

sight of the IR Extender.

MODE LED: This LED will illuminated when the power is connected.

Link LED: This LED will illuminate when connected to a Transmitter

unit that is connected to a source that is outputting a signal.

CAT5e/6 IN: Connect to the Transmitter unit with a Single CAT5e/6

cable for receiving all data signals.

RS232 OUT

LAN

CAT5e/6 IN

Blaster

Extender

MODE

LINK