Dolby Laboratories UEX/650 Installationsanleitung Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Zubehör Dolby Laboratories UEX/650 herunter. Dolby Laboratories UEX/650 14 Seiten. Upgrade kit for cp650 cinema processor

Seite drucken

Handling PC Boards

This upgrade involves handling printed circuit boards. Many components are very

sensitive to static electricity and can be destroyed if static charge on your body

discharges through the component. You do not even have to touch the component to

damage it. Before touching the components on the PC boards, ground yourself by

rubbing the frame of the unit with each hand or wearing an earthing strap.

Installation Steps

1. Remove mains power from the CP650 by unplugging the rear-panel power cord.

2. Open the setup control panel access door.

3. Remove the front-panel mounting screw located in the upper right-hand corner of

the setup control panel and carefully pull the front panel toward you to remove it.

4. Remove the seven subpanel mounting screws and carefully pull the subpanel

toward you to remove it. Be sure to support the panel while you perform the next

step.

Dolby

UEX/650 Upgrade Kit Installation Instructions

1 2 3

4 5 6 8

MAIN

Video Clamp RTA1 RTA2

Mic Bypass

Figure 1 CP650 Control Panel

Figure 2 Remove Control Panel

SERIAL DATA

MIC MUX

SIGNAL

PRESENT