CYP CHDBT-1H7CE Betriebshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Kabel und Anschlüsse CYP CHDBT-1H7CE herunter. CYP CHDBT-1H7CE 16 Seiten. 1×8 hdmi over hdmi and cat5e/6/7 splitter with poe and lan serving
Auch für CYP CHDBT-1H7CE: Betriebshandbuch (13 seiten)

Seite drucken

or games console to the LAN port of a receiver for that device to

share the network/internet access.

Warning: DO NOT connect the LAN connection with any of the

CAT5e/6/7 outputs, doing so may trigger a power shut down and

may damage the device.

IR IN: Connect the supplied IR Receiver cable for IR signal

reception. Ensure that remote being used is within the direct line-

of-sight of the IR Extender.

IR OUT: Connect the supplied IR Blaster cable for IR signal

transmission. Place the IR Blaster in direct line-of-sight of the

equipment to be controlled.

EDID STD/TV: The default setting is TV, when in this mode, the unit

will detect the EDID settings of the display device connected to

the CAT 5e/6/7 Output 1. If it detects a 4K×2K capable EDID setting

it will transmit the signal in that format to the output port. If no 4K×2K

capable EDID is detected then the unit will detect the EDID settings

and send out the signal that all outputs can accept.

This device has a last memory function and will retain the EDID

settings of the last device connected via the CAT5e/6/7 output

port when it is not connected to a display after power cycling.

Switch to the STD setting to use the unit's built-in EDID if there are

display problems. In this mode, the video output will be set to

1080p@60Hz and the audio at LPCM 2CH Stereo.

SERVICE: Reserved for manufacturer use only.

DC 24V: Connect the 24V DC power supply to the unit and plug

the adaptor into an AC outlet.