CYP CLUX-18EU Betriebshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Kabel und Anschlüsse CYP CLUX-18EU herunter. CYP CLUX-18EU 12 Seiten. 1 by 8 hdmi v1.3 splitter
Auch für CYP CLUX-18EU: Betriebshandbuch (12 seiten)

Seite drucken

7.2 Rear Panel

. USB: For software update only.

. HDMI OUT 5/6/7/8: Using HDMI cables connect these slots to displays in

order to show HDMI content.

. SYS Reset ON/OFF: This switch allows the user to perform a system reset.

The default setting is OFF, leave as is when in normal use. By switching

ON, the unit will perform a reset every 8~10 minutes, in order to perform

this function the displays must have CEC support. When performed

successfully, the system will automatically switch the displays to HDMI

1 input. The system reset will not perform on those displays that do not

have a CEC function.

. EDID Control switch: This EDID control switch is determined if you are

going to use the EDID from the display attached to output 1 or use an

onboard EDID. When select to TV, the EDID will attach to output 1. When

selected to STD, the EDID will become onboard EDID and the factory

default setting is in TV mode.

. Power: Plug the DC 5V power supply into the splitter and connect the

adaptor to AC wall outlet.