CYP CPRO-U8T Betriebshandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Kabel und Anschlüsse CYP CPRO-U8T herunter. CYP CPRO-U8T 16 Seiten. 1 by 8 4k uhd hdmi splitter
Auch für CYP CPRO-U8T: Betriebshandbuch (12 seiten), Betriebshandbuch (12 seiten)
Seite drucken
the EDID from the sink connected to output 1 and pass it to the
connected source. When set to "STD" mode the unit will use a built
in EDID defined as 1080p@60Hz, 8-bit, LPCM 2.0.
6
SYS-RST SWITCH: Controls the CEC "active source" reset
functionality of the unit. When switched to the "ON" position
the unit will send a CEC active source reset command to all
connected displays every 8~10 minutes. This command requests
that any connected CEC compliant TVs switch to the input the unit
is connected on.
Note: The connected TV must have CEC support enabled. Not all
HDMI TVs support this CEC command.
7
SERVICE: This slot is reserved for firmware update use only.
6.2 Rear Panel
DC 5V
1
1
1
DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.
2
OUT 1~4: Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output.
3
IN: Connect to HDMI source equipment such as a media player,
game console or set-top box.
4
OUT 5~6: Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output.
3
OUT
2
3
4
2
IN
5
6
3
OUT
7
8
4