CYP DCT-42 Betriebshandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Verstärken CYP DCT-42 herunter. CYP DCT-42 16 Seiten. Mini stereo amplifier 2 x 20w with optical and line level inputs
Seite drucken
6.4 RS-232 Commands
COMMAND
System Commands
HELP
?
GET FW VER
GET MODEL NAME
SET FACTORY DEFAULT
SET POWER N1
GET POWER
SET SYSTEM REBOOT
COMMAND
Audio Commands
SET AUDIO OUT A MUTE N1
GET AUDIO OUT A MUTE
SET AUDIO OUT A ROUTE N1
GET AUDIO OUT A ROUTE
10
DESCRIPTION AND PARAMETERS
Show the full command list.
Show the full command list.
Show the unit's firmware version.
Show the unit's model name.
Reset all settings to the factory defaults.
Set the units power state to on or stand-by.
Available values for N1:
ON
[Power On]
STANDBY
[Stand-by Mode]
Show the unit's current power state.
Reboot the unit.
DESCRIPTION AND PARAMETERS
Enable or disable mute on the audio
output.
Available values for N1:
OFF
[Un-Mute]
ON
[Mute]
Show the current audio output mute state.
Set the audio input source.
Available values for N1:
1
[Line In]
2
[Optical]
Show the current audio input source.