Ashley Signature EF19-42A Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Innenkamin Ashley Signature EF19-42A herunter. Ashley Signature EF19-42A 15 Seiten.

Seite drucken

TROUBLE SHOOTING GUIDE

There are no user serviceable parts inside the fireplace. If the unit appears to

malfunction, turn the unit off and unplug the unit from the wall immediately.

Please contact the store that this was purchase from with the original purchase

receipt or call 1 (800) 477-2222 for service related questions or concerns.

Alteration of the fireplace will void its warranty and may cause the fireplace to

malfunction resulting in electrical shock, fire, death or serious bodily injury or

property damage.

PROBLEM

1: No power or function

2: Have flame effect, but fireplace

does not blow warm air

3: Fireplace does not work, but Power

and Fireplace switches are in the "ON"

position and thermostat is set on "99"

4: The display unit on the control

panel shows "

indicator is quick flashing indicating it

is in alarm mode.

5: Only the flame icon is present and

does not display the flame levels

(ie.L1,L2...) when the flame button is

pressed.

Warranty & Return Policies

Please refer to the included warranty card. Be sure to keep this manual and

warranty card for possible future use.

Manufactured by Guangdong Paite Electrical Technology Co. LTD for

Ashley Furniture Industries, Inc.

MODEL#:

EF19-42A

" and the function

SOLUTION

1.1: Check that unit is plugged into a standard

120V outlet.

1.2: Press power button on the control panel

2.1: Confirm temperature setting exceeds

room temperature.

2.2: Try to turn on/off fireplace button several

times to make sure it's in the "ON" position.

3.1: Turn all switches to the "OFF" position

and unplug the unit from the wall outlet for

5-10 minutes. After 5-10 minutes plug the

unit back into wall outlet, and operate as

normal.

4.1: Unplug the unit from the wall outlet for

5-10 minutes. After 5-10 minutes plug the

unit back into wall outlet, and operate as

normal

5.1: Press and hold the flame button for 5

seconds. Once the unit "beeps" the flame

levels should appear.

Page 14 of 14