Cypress EZ-USB HX2LP CY4605 Schnellstart-Handbuch
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Hauptplatine Cypress EZ-USB HX2LP CY4605 herunter. Cypress EZ-USB HX2LP CY4605 2 Seiten. Reference design kit
Seite drucken
CY4605 EZ-USB
1
Insert the kit CD/DVD into the CD/DVD
drive of your PC. Review kit contents.
3
Plug the wall mounted power supply into an
AC power receptacle providing power in the
range 100 V to 240 V, 50 Hz or 60 Hz.
Connect the power supply plug to the hub's
'DC Supply' jack J12.
®
HX2LP™ REFERENCE DESIGN KIT
QUICK START GUIDE
2
Place jumper on J5 (power status) and J6
(port status) to enable LEDs D1 and D3-D6.
Power LED D1 glows only in self-powered
mode. The green LEDs (D3 and D5) indicate
that the downlink port is enabled. The amber
LEDs (D4 and D6) indicate the port has an
exception condition.
4
To connect to the PC, plug the USB A to B
cable into the hub's 'Up Stream' connector
P1. Plug the other end of the cable into one
of the PC's host controller ports. The hub
enumerates as a 'Generic USB Hub'. The hub
is now ready for any low speed, full speed,
or high speed devices to be plugged into the
ports. For the 2-port hub, the board is labeled
PORT1 and PORT 2.