Cloud CA Series Installations- und Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Kontrolleinheit Cloud CA Series herunter. Cloud CA Series 19 Seiten.
Auch für Cloud CA Series: Technisches Bulletin (13 seiten)
Seite drucken
C l e a r l y b e t t e r s o u n d
SAFETY INFORMATION
SAFETY INFORMATION
Safety notes regarding installation
•
Do not expose the unit to water or moisture.
•
Do not expose the unit to naked flames.
•
Do not block or restrict any air vent.
•
Do not operate the unit in ambient temperatures above
35 °C.
•
Do not touch any part or terminal carrying the
hazardous live symbol
unit.
•
Do not perform any internal adjustments unless you
are qualified to do so and fully understand the hazards
associated with mains operated equipment.
•
The unit has no user serviceable parts. Refer any
servicing to qualified service personnel.
•
If the moulded plug is cut off the AC power lead for
any reason, the discarded plug is a potential hazard and
should be disposed of in a responsible manner.
Safety Considerations and Information
All models in the Cloud CA amplifier range must be earthed.
Ensure that the mains power supply provides an effective
earth connection using a three-wire termination.
Caution – High Voltage
Do not touch any part or terminal carrying the hazardous
live symbol while power is applied to the unit. Terminals to
which the hazardous live symbol refers require installation by
a qualified person.
Caution – Mains Fuse
CA Series amplifiers contain no user-replaceable fuses.
Caution – Servicing
The unit contains no user-serviceable parts. Refer servicing to
qualified personnel. Do not perform servicing unless you are
qualified to do so. Disconnect the power cable from the unit
before removing the top panel and do not make any internal
adjustments with the unit switched on. Only reassemble the
unit using bolts/screws identical to the original parts.
6
CA Series Installation & User Guide v1.0
while power is supplied to the
Conformities
This product conforms to the following European EMC
Standards:
BS EN 55035:2017 (Immunity)
BS EN 55032:2015 (Emissions)
BS EN 61000-3-2:2014 (Harmonics)
BS EN 61000-3-3:2013 (Flicker)
This product has been tested for use in commercial and
light industrial environments. If the equipment is used in
controlled EMC environments, the urban outdoors, heavy
industrial environments or close to railways, transmitters,
overhead power lines etc. the performance of the unit may
be degraded.
This product conforms to the following electrical safety
standard:
BS EN 62368-1:2014
RoHS and WEEE declaration
Cloud Electronics Limited manages its business and
collaborates with its suppliers to comply with the European
Union restriction of the use of certain hazardous substances
in electrical and electronic equipment, RoHS Directive
(2002/95/EC), that came into force on 1st July 2006, and
similar restrictions in other jurisdictions.
The "crossed out wheelie bin" symbol on the
product and represented above is there to remind
users of the obligation of selective collection of
waste. This label is applied to various products to
indicate that the product is not to be thrown
away as unsorted municipal waste. At the end of life, dispose
of this product by returning it to the point of sale or to your
local municipal collection point for recycling of electric and
electronic devices.
Customer participation is important to minimize the
potential effects on the environment and human health that
can result from hazardous substances that may be contained
in this product.
Please dispose of this product and its packaging in accordance
with local and national disposal regulations, including those
governing the recovery and recycling of waste electrical
and electronic equipment. Contact your local waste
administration, waste collection company or dealer.