Cloud CV4250 Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch für Kontrolleinheit Cloud CV4250 herunter. Cloud CV4250 15 Seiten. Cv series
Auch für Cloud CV4250: Schnellstart-Handbuch (13 seiten), Technisches Bulletin (13 seiten)
Seite drucken
Key Features
Amplifier:
•
Advanced design of 2, 4 and 8-channel Class D power amplifiers
•
Standard "out-of-the-box" Cloud amplifier functionality:
requires no computer configuration or internal access for basic
operation
•
Transformerless output stage drives 70/100 V-line systems
directly
•
Nominal power ratings: 2 x 500 W (CV2500), 4 x 250 W
(CV4250), and 8 x 125 W (CV8125)
•
Thermal protection, overcurrent limiting and DC offset
protection
•
Switch-on delay for speaker protection during power-up
•
On 4 and 8 channel models, power sharing allows odd and even
channel groups to deliver a maximum of 500 W each
•
Per-channel, front panel LEDs for signal presence, peak level,
protection activity and power status
•
Balanced line level inputs
•
Per-channel output level controls
•
Rear panel input routing switches configure amplifier for
manual selection of multichannel, stereo or mono operation
•
Rear panel switches select 70 V-line or 100 V-line output levels
•
Per-channel high-pass filter (65 Hz default frequency: adjustable
in software) to protect against transformer saturation in
70/100 V-line systems
•
Balanced, line level auxiliary outputs with full channel
functionality, configurable and controllable via software
•
Independent Automatic Power Down on odd and even channel
groups; minimises power consumption in absence of an input
signal
•
<3 W power consumption with all channels quiescent
•
RS-232C serial port for remote control of all amplifier functions,
including DSP configuration
•
Compatible with standard Cloud RL Series remote level control
plates (per-channel)
•
Remote Power Down control input
•
3-way GPIO port for master mute function or fault reporting
•
Variable speed forced-air cooling
•
2U 19" rackmounting units
DSP functions:
•
On-board, per-channel DSP section providing extensive routing,
filtering, EQ and limiting for all channels including the auxiliary
outputs
•
1.5 s delay pool, freely assignable across all channels and aux
outputs
•
Simple DSP configuration via on-board web server; any device
with a compatible web browser and an Ethernet connection
can be used to perform setup
•
Built-in DSP crossover configurations allow amplifiers to be
easily used with 2-way speakers
•
Crossover configurations allow derived LF sub output
•
DSP-implemented 5-band parametric speaker EQ section
•
Optional EQ presets for OEM speakers (under development)
•
Password-protected multi-user security system
•
Optional web monitor card performs load impedance tests and
reports out-of-tolerance results via a web interface or SNMP
C l e a r l y b e t t e r s o u n d