Dolmar 111i Service-Handbuch - Seite 18
Blättern Sie online oder laden Sie pdf Service-Handbuch für Kettensäge Dolmar 111i herunter. Dolmar 111i 19 Seiten.
![Dolmar 111i Service-Handbuch](/uploads/products/server2/974024/974024.jpg)
- 1. Table of Contents
- 2. Index Technical Data
- 3. Special Tools
- 4. Chain Brake
- 5. Clutch, Clutch Drum
- 6. Oil Pump
- 7. Ignition System
- 8. Starter Assembly
- 9. Carburettor, Intake System
- 10. Cover System, Air Filter
- 11. Vibration Dampers, Handle
- 12. Fuel Tank
- 13. Cylinder and Piston
- 14. Crankcase, Crankshaft
- 15. Checking Operations
- 16. Torques
DOLMAR GmbH
12 Checking operations
12-02 Checking the ignition system
Use tester no. 956.010.300 for checking the
ignition system / spark plug.
12-03 Checking carburettor and crankcase
Pressure-testing of the carburettor or
crankcase is to be performed at max. 0.5 bar.
12-05 Checking the crankcase with cylinder
For pressure-testing the crankcase blank off
the exhaust duct using flange no. 944 603 030.
Screw flange no. 944 603 020 to the inlet duct.
18
12-03 Checking the carburettor
For in-situ checking of the carburettor sepa-
rate the fuel pipe from the connection nipple.
Fit pressure tester no. 965.004.000 to the
connection nipple.
12-04 Use a torque wrench for tightening
screwed connections
Cylinder base screw, crankcase screws,
silencer screws, the flywheel nut and the
clutch hub, must be tightened using the
prescribed torque.