Cypress CSO-T2 Betriebshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Medienkonverter Cypress CSO-T2 herunter. Cypress CSO-T2 12 Seiten. Instant hqv hd scaler box

Seite drucken

5. Remote Control

1 Menu: Press the button to bring up

OSD main menu page.

2 Power: Press the button once to

power on the system, press again to

enter standby mode.

3 Cleaner: Press to switch the Noise

Reduction (NR) feature. There are four

levels can adjust Off/Low/Middle/High

and these features workable when input

resolution is 480i/480p/576i/576p/1080i.

4 Detail: Press to switch the Detail

Enhancement feature. There are five

levels can adjust 0/25/50/75/100. The

factory default value is 0 (OFF).

5 Up/Down/Left/Right: Press the Up/Down button to move the highlight

bar to your desired parameter during the OSD operation. Press the Left/

Right button to increase/decrease the setting values.

6 Enter: Press the button to confirm the selection.

7 Demo: Press for window split demo mode. This demo mode will display

half left and half right side for video quality comparison. The half left side

is the original video source without HQV process and the half right side

video quality after HQV process. This demo mode workable when input

resolution is 480i/480p/576i/576p/1080i.

8 Aspect Ratio: Press to select the Aspect Ratio format, there are

Standard/ Full Screen/ Crop/ Anamorphic/ Flexview/ 1_1/ Cinemascope

and these features workable when input resolution is 480i/480p/576i/576p.

When input resolution is 720p/1080i/1080p, the standard/1:1/

Cinemascope can be adjusted,other features are futile. The factory

default is Standard.

9 Input selection: Press each quick input selection button to choose input

source.

10 Output: Press the button sequentially to select output resolution (Auto

mode/720p/1080p).

POWER

CLEANER

DETAIL

ENTER

DEMO

A.RATIO

HDMI 2

OUTPUT

HDMI 1

COMP

VIDEO

INPUT

Instant

HQV

CR-60