Ashly ne8250c Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Ashly ne8250c herunter. Ashly ne8250c 15 Seiten.

Ashly Amplifier User Guide (Rev. B, Ver. 0)

2.0 Getting started

Important: Before installation, unplug the amplifier, and turn down the channel attenuators

on the front panel.

This chapter discusses the following topics:

2.1 Cooling

Do not block any of the amplifier ventilation vents. When using an equipment rack, mount the

units directly on top of each other. Do not block rear, front, or side air vents. The side walls of

the rack should be a minimum of one inch (2.5cm) away from the amplifier sides, and the back

of the rack should be open.

2.2 Set up an Ashly Power Amplifier

Figure 3, "Ashly Power Amplifier rear panel" below shows the Ashly Power Amplifier's rear

panel:

To set up an Ashly Power Amplifier, follow these steps:

1. Use the first or second port and a CAT5 cable to connect to the ACENet switch. Do not

connect both.

2. Connect the 10/100 Ethernet port to the ACENet switch.

3. Connect the alternating current (AC) power cord.

Figure 3: Ashly Power Amplifier rear panel