Cypress CM-392 Betriebshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Computer Hardware Cypress CM-392 herunter. Cypress CM-392 7 Seiten. Video to hdmi scaler box
Auch für Cypress CM-392: Betriebshandbuch (16 seiten)

Seite drucken

(4). Operation Controls and Functions

Front Panel

1. Power button and LED indicator:

Press the button once to power on the unit, press again to power off.

When the unit is powered on, one of the input LEDs will illuminate depending on

your last selection of input source before power off.

The factory default setting for the input is CV (composite video).

The green LED illuminates when composite video is selected.

The yellow LED illuminates when S-Video is selected.

2. Input select button:

Press the button to select your desired input source between composite

video and S- Video.

3. IR Sensor: Infrad remote control sensor.

4. Menu/Enter: This button serves two purposes.

a. Press the button to bring up OSD main control menu as shown in the "OSD Operation".

b. To act as a "enter" key to enter sub menu of you selected item or adjust

value of the selected item.

5/6. +/- button: Press the button to move up or down the tick "V" to your

desired parameter. Or after a parameter is selected by pressing MENU/ENTER button,

press the button to alter the value of your selected parameter.

Note:

Once out of range, you can press "MENU" and "-" buttons together for

over 5 seconds to go back to HD factory default setting 480p. Or press"+" and "-"

button together for over 5 seconds to go back to PC factory default setting XGA.

Rear Panel

1. DC power jack: 5V 2A DC power input.

2. Composite Video: Use a Composite video cable to connect the composite video

output of the source equipment to this composite video(CV) input on the back

of the scaler.

3. S-Video: Use a S-Video cable to connect the S-Video output of the source

video equipment to this " S-Video" input on the back of the video scaler.

S-Video provides improved performance over composite video and is

recommended over composite.

4. Audio input jack: Analog L/R stereo format.

5. HDMI output: The CM-392 can output a variety of LCD and HDTV progressive

resolutions, through HDMI connector.

Digital output: Connect CM-392's digital HDMI output to the HDMI input of your

TV/display unit using a HDMI to HDMI cable.

Note:

The CM-392's 1080i resolution can be displayed on the most of the monitors but

may not work with some HDTVs due to this 1080i output is 960x 540p @37MHz clock

rate which is half the standard 1080i clock rate.

POWER

INPUT

OUTPUT

HDMI

480p

CM-392 Video to HDMI Scaler Box

INPUT

AUDIO

XGA

DC 5V