Ashly PE Series Betriebshandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Verstärken Ashly PE Series herunter. Ashly PE Series 13 Seiten. Pe-series amplifier
Auch für Ashly PE Series: Betriebshandbuch (13 seiten)
Page - 6
Introduction - 2
The PE Series - 3
Physical Description - 4
Installation – 5
Requirements
Typical Applications
Connectors & Polarity
Operation - 7
Troubleshooting - 8
Spec Table - 9
Measurements - 10
Dimensions - 11
Warranty - 12
Typical Applications
The most common use
of a PE-Series amplifier
is a 2-channel source
driving 2 speaker
channels. In this
illustration, the PE-
Series amplifier is
receiving a signal and
then 'returns' it to a
second amplifier using
the provided
connectors. The
amplifier is in STEREO
mode.
Connectors & Polarity
PE-Series amplifiers utilize several different professional audio connectors. The Euroblock
and Screw-Terminal connectors are clearly marked on the amplifier's rear panel and are
straightforward. The connection polarity for the other three types of connectors (XLR, TRS,
and Speakon) are less obvious. The diagrams below show how each connector should be wired
for proper operation. Be sure to read the Operation section of this manual for important
information on the three operating modes.
Operator Manual – PE Series Amplifiers
Copyright© 2005 – Ashly Audio Inc.
Because of their efficient
and high-power design,
PE-Series amplifiers are
well suited to single
channel output to mono
speaker load such as a
subwoofer. This
illustration shows both
PARALLEL and
BRIDGED output
connections using a single
input signal.