Ashly Protea NE4250.10 Betriebshandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Verstärken Ashly Protea NE4250.10 herunter. Ashly Protea NE4250.10 16 Seiten. Network enabled multi-channel power amplifiers
Auch für Ashly Protea NE4250.10: Betriebshandbuch (16 seiten), Betriebshandbuch (16 seiten), Spezifikationsblatt (2 seiten), Spezifikationen (2 seiten), Betriebshandbuch (16 seiten), Betriebshandbuch (20 seiten), Betriebshandbuch (20 seiten)

Seite drucken

1. Amplifier Control Surface

Operating Manual - NE Multi Channel Power Amplifier

5. PROTEA

SOFTWARE

Protea

software offers a comprehensive suite of tools for controlling Ashly NE multichannel amplifiers. The standard

NE multichannel amplifiers allow for Ethernet control and monitoring of power functions, mute, and preset control. With the

DSP option installed, software control and monitoring of audio functions can be custom configured on a per channel basis, as

well as through linked channels. More in depth discussion of software features can be found in the Protea

The base amplifier software includes a main control surface, password protected security functions, and network property

management. Link Group Configuration and Power On Delay* can be set up under the Device Options menu tab. In addition,

provisions for implementing DSP functions, AES/EBU Inputs, and Cobranet inputs are available, presuming the necessary

hardware options have been installed in the amplifier. Protea

display the resulting menu items once it recognizes the amplifier on the network.

*Power On Delay does not work when standby mode is activated via contact closure.

Link Group Configuration - Linking allows the controls for multiple DSP function blocks to track each other. For ex-

ample, if two different graphic equalizer blocks are assigned to a link group, any change made to a control within either of the

equalizers will result in an identical change to the other. Blocks may be linked across channels.

Each Protea

device will support up to 16 link groups. DSP function blocks can be individually assigned to these link

groups. Once assigned to a group, all similar functions within that group will track parameter changes. More than one function

type may be assigned to a group. Each link group can be assigned a name by the user, and can also be assigned a color for easy

identification. For further details about linking, see the online help in Protea

Preset Options - The Preset Options tab in the main amplifier window allows amplifier setups to be saved to and recalled

from the amplifier as well as a computer. Presets are a snapshot of all global settings on a given amplifier.

Sub Presets - Sub Presets are user defined groups of DSP functions within one channel or across multiple channels. Sub

Presets allow the end user to instantly recall a pre-determined set of DSP parameters to quickly address changing environmental

conditions, without the risk of making undesirable or irrecoverable system changes.

The Amplifier Control Surface Tab

The control surface tab is the main software interface for the amplifier. Key features of this window include:

1) Channel and Offset Link Group Faders - The main level control provides up to 40dB of analog input attenuation.

More than 40dB of cumulative attenuation causes the channel to mute. If a channel has been assigned to an offset link group, a

colored triangular marker appears on the left side of the fader graticule for secondary level control of all channels in that group.

The main level control faders can not be linked to a group.

2) Mute button - This mutes the input channel

3) Polarity button - This inverts the phase of the input channel

4) Offset link group - Up to 16 groups are available for the purpose of linking similar function parameters across multiple

channels. In addition to the control surface secondary level control (not the main fader), most DSP functions have a link group

check box in their work window to assign a specific parameter to one of the eight link groups if desired. Link groups can be

renamed by clicking on any group name and entering the new name then pressing <enter> on the keyboard.

5) Attenuators - These two dials indicate the physical position of hardware controls on either the amp front panel or

remote DC level control (if present). Note that these will display the position of attenuators even when disabled by software.

6) Total Attenuation - This indicates the total amount of attenuation being applied to the channel. This is the sum of the

following attenuators: main fader, offset link group attenuation, front panel and remote attenuators (if enabled).

7) Meters - Input and Output meters display the real time activity per channel, in dB below rated output. Also, the ampli-

fier's operating temperature and output current are shown. Output current shows that the amplifier channel is actually delivering

output to a connected speaker load.

software will auto-detect any installed hardware options and

Software.

software online help.