Ashly SRA-2075 Betriebshandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Verstärken Ashly SRA-2075 herunter. Ashly SRA-2075 12 Seiten. Sra series standard power amplifiers
Auch für Ashly SRA-2075: Betriebshandbuch (12 seiten), Broschüre & Specs (4 seiten), Spezifikationsblatt (2 seiten), Spezifikationsblatt (2 seiten)
Seite drucken
Page - 10
Important Safety
Instructions – 2
Spec Table
Introduction - 3
The SRA Series - 4
Power Output Per Channel
Stereo Mode, all channels driven
Physical Description - 5
8 ohms, 20 Hz - 20 kHz, 1% THD
Installation – 6
4 ohms, 20 Hz - 20 kHz, 1% THD
Operation – 8
Bridged Mono Mode
8 ohms, 20 Hz - 20 kHz, 1% THD
Troubleshooting - 9
Signal to Noise (20 Hz-20 kHz, unweighted):
Spec Table - 10
Voltage Gain:
Dimensions - 11
Output Circuitry:
Line Current Draw (all channels driven @4Ω)
Warranty - 12
Standby
Idle
1/8
th
1/3 Power Sine Wave
Thermal Dissipation (all channels driven @4Ω)
Standby (BTU /hr)
Idle (BTU/hr)
1/8
th
1/3 Power Sine Wave (BTU/hr)
Frequency Response
Damping Factor - 8 ohm load, < 1 kHz
Input Impedance
Maximum Input Level:
Input Impedance
Cooling
Front Panel Indicators per channel
Front Panel Indicators overall
Attenuators
Input Connectors, each channel
Output connectors, each channel
Amplifier Protection
Power Cable Connector
Dimensions
Weight
Power Pink Noise
Power Pink Noise (BTU/hr)
All Specifications Subject to Change or Improvement Without Notice.
Operator Manual – SRA Series Amplifiers
SRA-2075
SRA-4075
2 x 40W
4 x 40W
2 x 75 W
4 x 75 W
1 x 150 W
2 x 150 W
>100 dB
>100 dB
26 dB, 36 dB sensitivity (selectable)
Class D
Class D
37mA
39mA
320mA
565mA
0.70A
1.25A
1.23A
2.25A
13
15
61
113
73
145
85
150
Output Overcurent, DC Output, Mail Supply Rail Overvoltage
Chassis Temperature, Inrush Limiting, Mains Fuse
9.0 lbs
10.0 lbs
Copyright© 2010 – Ashly Audio Inc.
SRA-2150
SRA-4150
2 x 80W
4 x 80W
2 x 150 W
4 x 150 W
1 x 300 W
2 x 300 W
>103 dB
>103 dB
Class D
Class D
89mA
102mA
370mA
660mA
1.10A
1.95A
2.10A
3.80A
14
23
72
137
111
211
126
263
20 Hz - 20 kHz, +/- 1.0 dB
> 200 into 8Ω
20 kOhm, balanced
+21 dBu
20kΩ balanced
Convection
Clip & Signal
power, standby, protect
Per channel: front panel
3- Pin Euroblock
Screw terminals
3-Prong IEC
19" x 1.75" x 11"
9.0 lbs
10.0 lbs