Ashly FR-8 Betriebshandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Fernsteuerung Ashly FR-8 herunter. Ashly FR-8 17 Seiten. Fr remotes network remote controls
Auch für Ashly FR-8: Betriebshandbuch (12 seiten), Produkt-Spezifikation (2 seiten)

Seite drucken

Operating Manual - FR-8 and FR-16 Remote Level Controller

Troubleshooting Tips:

1) I can't find the target device I want to control - Is the target device plugged into

the network? Is it turned on? Are there multiple target devices of the same model? Rename

individual devices with a unique identifier. For an immediate update of available devices, click

<Scan for Devices> at the bottom of the main Protea

2) How do I get rid of extra target devices listed that do not exist? The FR target

device drop down listing is taken directly from the main Protea

the network tree appear green if they are live units, and red if they were once available but are

now offline. To clear all inactive devices from the menu tree, right click on <Ashly Networks>

at the top of the menu tree and click <Clear Inactive Devices From All Groups>.

3) Even though my user name is "default" or "admin", I don't have access to

the target device - Are there any additional text characters in the user name field? Is the

password field blank? Any password entry, even on the reserved user-names of "default" or

"admin" must have a corresponding match in the target devices.

4) What do the various LED indicators and blinking patterns mean?

Mute/Unmute - If a fader is assigned to either I/O level mode or mixer mode, it's

push button will be solid red when muted. Mute function is disabled in A/B source select

mode. If a fader is unassigned, it will not light.

Signal Level - LEDs indicate signal level with green and amber according to the defined

dBu thresholds. If the fader is not assigned a function, it remains dark.

LED is disabled in A/B source select mode.

A/B Source Select - In this mode the LED will be either solid red or green to indicate

which input source is selected. The amber signal level LED remains active and mute is disabled.

Factory Reset - All LEDs glow amber during factory reset until held buttons are released.

Communications failure - If a fader was assigned to a target device, but that target

device becomes unavailable, the fader LED will continuously flash red to indicate that com-

munication has been lost for that fader. See if the target device is powered on and connected

properly to the network.

Flash Reprogram - In flash reprogram mode, all controls are disabled and the highest

fader LED glows solid green while the master fader LED glows amber. Once reprogramming

begins, red LEDs blink to indicate the new program is being loaded. Upon completion, all LEDs

either turn off or revert to their previously defined status, and the FR device is ready for use.

Unlike factory reset, flash reprogram does not delete or overwrite user settings on the FR device.

5) Why won't the FR device let me flash reprogram it? If the firmware program in

the FR device becomes corrupt for some unexpected reason, you will not be able to flash repro-

gram it from the FR control surface in Protea

flash reprogrammer as follows:

1) Click on <Flash Reprogrammer> in the main Protea

2) Click <Launch Flash Reprogrammer>

3) In the Select Device window, click <Skip This Step>

4) Select the latest FR firmware file from website download or CD

5) Enter MAC address found on FR device back panel

6) Enter IP address of 255.255.255.255

7) Finally, click <Flash Reprogram>

network tree.

network tree. Devices listed in

software. Rather, you must use the main Protea

software window

The green signal level