Ashly Protea NE4250.10 Spezifikationen - Seite 2

Blättern Sie online oder laden Sie pdf Spezifikationen für Computer Hardware Ashly Protea NE4250.10 herunter. Ashly Protea NE4250.10 2 Seiten. Network enabled multi-channel power amplifiers
Auch für Ashly Protea NE4250.10: Betriebshandbuch (16 seiten), Betriebshandbuch (16 seiten), Spezifikationsblatt (2 seiten), Betriebshandbuch (16 seiten), Betriebshandbuch (16 seiten), Betriebshandbuch (20 seiten)

Ashly Protea NE4250.10 Spezifikationen
Protea ne24.24M Matrix Processor
Input
Max Input Level
Input Gain Range
Output
Max Output Level
Output Gain Range
Frequency Response
THD
Dynamic Range
Output Noise
Power Requirements
Shipping Weight
Dimensions
Connections
Environmental
Mic Preamp Gain
Mic Preamp Phantom Power
Mic Preamp EIN
Parametric EQ Bandwidth
Parametric EQ Range
Parametric EQ Resolution
Low-Shelf EQ Slope
Low-Shelf EQ Frequency Range
Low-Shelf EQ Range
High-Shelf EQ Slope
High-Shelf EQ Frequency Range
High-Shelf EQ Range
All Pass Filter Type
All Pass Filter Frequency Range
Notes:
0dBu = 0.775 VRMS
All features and specifications are preliminary and subject to change before release
Active Balanced, 18 kohms
+20dBu
-50dB to +12dB, selectable polarity
Active Servo Balanced, 112 ohms
+20dBu
-50dB to +12dB, selectable polarity
20 Hz-20kHz, ±0.25 dB
<0.01% @1 kHz, +20 dBu
>110 dB (20 Hz-20 kHz) unweighted
<-90 dBu unweighted
90 - 240VAC, 40W
13lbs (Maximum)
19.0"L x 3.5"H x 8.5"D
Euroblock
40-120 deg. F, (4-49 deg, C) noncondensing Autoleveler Hold Time
0dB, +20dB, +40dB, +60dB
+48VDC (9.6ma/input)
-128dBu, 20-20KHz, 50 ohm source
1/64th Octave to 4 Octave
+15/-30dB, 0.1 dB incr
1Hz
6 or 12dB/Octave
20Hz to 2KHz
+/-15dB, 0.1dB incr
6 or 12dB/Octave
3.886KHz to 20KHz
+/-15 dB, 0.1 dB incr
Second-Order (-180 degrees)
20Hz to 20KHz
NE Series specifications
Crossover High Pass Filter Type
Crossover High Pass Filter Slope
Crossover High Pass Filter Range
Crossover Low Pass Filter Type
Crossover Low Pass Filter Slope
Crossover Low Pass Filter Range
Maximum Input Delay
Maximum Output Delay
Gate Threshold
Gate Floor
Gate Attack
Gate Release
Autoleveler Target Level
Autoleveler Ratio
Autoleveler Threshold Below Target
Autoleveler Gain Increase Rate
Autoleveler Gain Decrease Rate
Ducker Trigger Threshold
Ducker Depth
Ducker Release:
Cross Point Mixer Gain
Compressor/Limiter Threshold
Compressor/Limiter Ratio
Compressor/Limiter Atack
Compressor/Limiter Release
Input A/D | Output D/A
DSP
Sample Rate
Propagation Delay
SRA Series specifications
Linkwitz-Riley, Bessel, Butterworth
12, 18, 24 and 48dB/Octave
Off to 20KHz, 1Hz incr
Linkwitz-Riley, Bessel, Butterworth
12, 18, 24 and 48dB/Octave
Linkwitz-Riley, Bessel, Butterworth
682.5ms, 20uS incr
682.5ms, 20uS incr
-80 to +20dBu, 1dBu incr
Off, -80 to 0dBu, 1dBu incr
.2, .5, 1, 2, 5, 10, 20, 50ms/dB
5, 10, 20 50, 100, 200, 500, 1000ms/dB
-40 to +20dBu, 1dBu incr
1.2:1, 1.5:1, 2:1, 3:1, 4:1, 6:1, 10:1
0, 1, 2, 3, 4, 5, 6Sec
-30 to 0dB, 1dB incr
5, 10, 20 50, 100, 200, 500, 1000ms/dB
5, 10, 20 50, 100, 200, 500, 1000ms/dB
-80 to +20dBu, 1dBu incr
-30 to 0dBu, 1dBu incr
5, 10, 20 50, 100, 200, 500, 1000ms/dB
-50 to +12dB, 1dB incr with Mute
-20dBu to +20dBu, 1dB incr
1.2, 1.5, 2., 3, 4, 6, 10, 20,:1
0.5ms to 50ms per dB
10ms to 1sec. per dB
24 bit
24-bit Freescale
48kHz
1.46ms
Ashly Audio, Inc.
847 Holt Road
Webster, New York USA 14580-9103
P: 800-828-6308, +1-585-872-0010
F: +1-585-872-0739
www.ashly.com [email protected]
Specifications subject to change without prior notice.
Latest information available at www.ashly.com.
© 2008 Ashly Audio, Inc.
Printed in U.S.A. 03/08