Cypress PU-515PL-KIT HDBaseT Betriebshandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Extender Cypress PU-515PL-KIT HDBaseT herunter. Cypress PU-515PL-KIT HDBaseT 16 Seiten. Hdbaset™ lite extender kit with poe & 2-way ir (up to 60m)
Seite drucken
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
IR2 Extender
RS-232 In
IR1 Blaster
1
2
1
RS232 In: Connect to a PC/laptop or RS-232 control device (with
supplied 3.5 mm mini-jack to D-sub 9-pin adaptor) for the transmission
of RS-232 commands.
2
IR2 Extender: Connect an IR extender cable for IR signal reception.
Ensure that remote control being used is within the direct line-of-
sight of the IR extender.
3
IR1 Blaster: Connect an IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be
controlled.
4
HDMI In: Connect to the HDMI source equipment such as a DVD or
Blu-ray player.
5
DC 24V: Connect the 24V DC power supply to the unit and plug the
adaptor into an AC outlet.
6
Link LED: The yellow LED will illuminate when both the input and
output CAT5e/6/7 signals are connected. The LED will blink when
there is an error with the transmission signal.
7
Power LED: This green LED will illuminate when the device is
connected to a power supply.
8
CAT5e/6 Out: Connect to the receiver unit with a single CAT5e/6/7
cable for transmission of all data signals.
8
HDMI In
Transmitter
3
4
Power
Link
CAT 5e /6/7 Out
5 6
7
8