Dolphin BC633F Handbuch für Installation und Wartung - Seite 10
Blättern Sie online oder laden Sie pdf Handbuch für Installation und Wartung für Spender Dolphin BC633F herunter. Dolphin BC633F 18 Seiten. Electronic foam soap dispenser
Seite drucken
FILLING THE SOAP TANK
1
Unscrew the soap tank from the pump assembly and
pull it out of the bottle support.
2
Fill the bottle with liquid soap to the top line. Make
sure the bottle is clean before filling it with soap.
3
Insert the bottle inside the bottle support.
4
Screw the soap tank back into the pump assembly.
Make sure the tank is firmly secured into place.
5
Press and hold the refill button located at the back of
the pump assembly until soap is dispensed from the
soap dispenser spout. Release the button once soap
begins dispensing from the spout. Alternately, use the
FILL function on the remote control (if available). see
page 11.
Note : When the soap in the soap tank reaches the
bottom line, the tank needs to be refilled. To refill the
soap tank please refer to steps 1-5.
10
|
Dolphin
|
BC 633F