ASI EZFILL10-0390-6-1-AC Handbuch für Installation und Wartung - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Wartung für Spender ASI EZFILL10-0390-6-1-AC herunter. ASI EZFILL10-0390-6-1-AC 16 Seiten. Soap dispenser

PRE-INSTALLATION INFORMATION

CHECK CONTENTS

Separate all parts from the packaging and check each part with the
PACK CONTENTS section.
Make sure all parts are received and separated before discarding any
packaging material.
If any parts are missing, do not attempt to install the system until you
obtain the missing parts.
IMPORTANT
Ensure there is adequate space and clearance under the vanity to
accommodate the SD Mounting Shank and Basin Nut in the desired
location before drilling the hole in the counter top.
Ensure there is adequate space to place the pump within reach of the
Com Cable from the SD Shank.
Keep in mind that the location of the user hands, while using the faucet
nearby, should not interfere with the soap dispenser sensor detection
area.
CAUTION
Do not install the soap dispensers facing a mirror or any other electronic
system operated by an infrared sensor.
To prevent reflection problems, it is recommended to keep a minimum
distance of 5' (1.5M) between the soap dispenser sensor and any other
directly facing objects.
3
1408201234 Rev J
05 August 2015