ASI EZFILL10-0390-6-1-AC Handbuch für Installation und Wartung - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Wartung für Spender ASI EZFILL10-0390-6-1-AC herunter. ASI EZFILL10-0390-6-1-AC 16 Seiten. Soap dispenser

Seite drucken

INSTALLATION

STEP 1 - INSTALLING THE EZFILL™ SOAP DISPENSING SYSTEM SOAP DISPENSER

Drill a hole in the counter top at the

designated location.

Remove and retain the basin nut and

the gasket from the base of the soap

dispenser body, sliding completely

over and off the soap tube, Com and

Power Cables.

Place the soap dispenser shank through

the escutcheon flange (with O-ring

down) into the hole in the counter top.

Slide the gasket, disk and nut over the

black soap tube and both cables and

thread onto the shank and secure it to

deck underside.

Black Nylon 1/4" dia. (Ø6) tube 36" (914)

long is supplied permanently attached

to dispenser head.

Assemble the tube to the connector

on pump by pushing it on(provided on

end of black tube).

Plug the Com cable into the Socket

cable (See Step 8)

Fix the pump to the desired location by

securing the support with the supplied

screws.

For ease of installation preference,

optionally swap steps 3 and 4 while

ensuring pump is within reach range of

Com cable.

1408201234 Rev J

MAX 1-3/16"

(Ø30)

MIN 1-1/32"

(Ø26)

1-1/8" Dia (Ø28)Recommended hole size

36" (914)

tube length

05 August 2015