ASI JD MACDONALD 10-20201-2 Betriebsanleitung und Teilehandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Betriebsanleitung und Teilehandbuch für Trockner ASI JD MACDONALD 10-20201-2 herunter. ASI JD MACDONALD 10-20201-2 15 Seiten. High-speed hand dryer
Auch für ASI JD MACDONALD 10-20201-2: Einrichtung (2 seiten)
Seite drucken
Hand Dryer
1. Use the
security hex wrench
2. Use the
security hex wrench
3. Use a Philips screwdriver to loosen the two (2) screws on the ceramic, and replace it with a new one,
making sure to use the washers and being careful to not over tighten the screws. (fig. 3)
4. Rehang the dryer back on the wall plate and secure the security screw into the base plate.
5. Reconnect in-wall power cord, if so equipped. Replace terminal cover.
6. Replace the filter drawer and lock the security screw, being careful to not over tighten the screw.
7. Restore power for operation.
(fig. 1)
Instructions for use of the drain tray
Generally, the remaining water following usage will evaporate from the absorbent ceramic plate. During
high usage frequency events excessive water will flow automatically to the drain tray. The capacity of the
drain tray is 8 oz (240 ml). It is recommended that the drain tray be cleaned every three (3) months
under heavy usage conditions and every four to six (4 ~ 6) months under light usage conditions in
indoor washrooms. The drain tray is retained on tracks molded into the bottom opening of the filter
access drawer. It is important that the wide end of the drain tray be inserted first and be positioned fully
at the back of the track. The bottom center recess is to be used as a finger grip handle to assist in
removing and reinstalling the drain tray. Water will flow through the overflow drain port if the drain tray
is full. A drain tube (not included) may be added as required by owner preference. The size of the drain
tubing (by others) is I.D. 15/64" (Ø6), O.D. 25/64" (Ø10), length is determined per installation to suit
conditions. See Fig. 1.
conditions. See Fig. 1.
DRAIN TUBE CUT TO
LENGTH TO SUIT
(BY OTHERS)
(fig. 1)
Operating Instructions and Parts Manual
Surface-mounted High-Speed hand dryer
to loosen the security screw and remove the filter access drawer. (fig. 1)
to remove and retain the security screw from the base plate and remove the dryer. (fig. 2)
REUSE
SCREW
(TYP)
(fig. 2)
Patented
TRACKS
R A Y
I N T
D R A
Patented
7
A S I J D M a c D o n a l d P t y. L t d .
www.asijdmacdonald.com.au
1800 023 441
(fig. 3)
CONICAL WASHERS
(REUSE EXISTING)
HANDLE
www.asijdmacdonald.com.au